BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Shermco Canada - ECPv6.15.11//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Shermco Canada
X-ORIGINAL-URL:https://shermco.ca
X-WR-CALDESC:Events for Shermco Canada
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20240101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251121T080000
DTEND;TZID=America/New_York:20251121T160000
DTSTAMP:20260519T091212
CREATED:20251001T155210Z
LAST-MODIFIED:20251001T155708Z
UID:3484-1763712000-1763740800@shermco.ca
SUMMARY:Electrical Safety for Non-Electrical Personnel (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nVirtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common\, everyday tasks. Jewelry contacting energized components\, overstressed power strips\, coffee pots\, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nReview of electrical hazards\, their causes and the potential for injuries and fatalities.\nUnderstand how to avoid these hazards.\nCommon situations that can increase risk to workers.\n OSHA/CSA electrical safety-related work practices regulation as it applies to non-electrical personnel.\nUnderstand electrical LOTO and the Safe Work Zone.\nUnderstand applicable OSHA/CSA regulations for non-electrical workers.\nUnderstand and apply NFPA 70E requirements for unqualified persons.\nUnderstand the safe approach distances for shock\, arc flash\, arc-blast and the purpose of a safe work zone.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-non-electrical-personnel-virtual-6/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251120T080000
DTEND;TZID=America/New_York:20251120T160000
DTSTAMP:20260519T091212
CREATED:20251001T155055Z
LAST-MODIFIED:20251001T155055Z
UID:3482-1763625600-1763654400@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-8/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251118T080000
DTEND;TZID=America/New_York:20251119T160000
DTSTAMP:20260519T091212
CREATED:20251001T153538Z
LAST-MODIFIED:20251001T153549Z
UID:3477-1763452800-1763568000@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-10/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251107T080000
DTEND;TZID=America/New_York:20251107T160000
DTSTAMP:20260519T091212
CREATED:20251001T153326Z
LAST-MODIFIED:20251001T153326Z
UID:3473-1762502400-1762531200@shermco.ca
SUMMARY:Electrical Safety for Managers & Supervisors (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nAs is often the case\, supervisors\, managers\, and engineers who are responsible for plant maintenance are not actually the individuals performing hands-on maintenance operations. However\, it is critical that they understand workplace safety policies and regulations so they can plan for the direction and training requirements of maintenance staff and assure that proper PPE\, LOTO\, and other safety procedures are well understood and followed. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nHow electrical hazards in the can affect your personnel\, your company and those responsible for electrical workers.\nRecognize electrical safety hazards and plan a course of action to address each one.\nOSHA/CSA regulations and NFPA 70E requirements for taking specific measures to prevent electrical hazards from causing injury or death.\nElectrical hazard awareness and recognition.\nManaging liability created by electrical hazards.\nDesigning and implementing an Electrical Safety Program (ESP) including policies\, safe work procedures and permits\, hazard analysis\, risk assessments and reduction\, training\, PPE and other written program documents.\nPerforming an electrical hazard/risk analysis.\nUsing the NFPA 70E to interpret hazard/risk category classification (HRC) of a given task and assure adequate PPE.\nHow to incorporate changes implemented by the NFPA 70E update.\nIdentify the steps needed to protect employees who work on or near energized parts.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-managers-supervisors-virtual-4/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251106T080000
DTEND;TZID=America/New_York:20251106T160000
DTSTAMP:20260519T091212
CREATED:20251001T152750Z
LAST-MODIFIED:20251001T152750Z
UID:3470-1762416000-1762444800@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-9/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251104T080000
DTEND;TZID=America/New_York:20251105T160000
DTSTAMP:20260519T091212
CREATED:20251001T152559Z
LAST-MODIFIED:20251001T152559Z
UID:3465-1762243200-1762358400@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-9/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251024T080000
DTEND;TZID=America/New_York:20251024T160000
DTSTAMP:20260519T091212
CREATED:20251001T151134Z
LAST-MODIFIED:20251001T151628Z
UID:3455-1761292800-1761321600@shermco.ca
SUMMARY:Electrical Safety for Non-Electrical Personnel (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nVirtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common\, everyday tasks. Jewelry contacting energized components\, overstressed power strips\, coffee pots\, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nReview of electrical hazards\, their causes and the potential for injuries and fatalities.\nUnderstand how to avoid these hazards.\nCommon situations that can increase risk to workers.\n OSHA/CSA electrical safety-related work practices regulation as it applies to non-electrical personnel.\nUnderstand electrical LOTO and the Safe Work Zone.\nUnderstand applicable OSHA/CSA regulations for non-electrical workers.\nUnderstand and apply NFPA 70E requirements for unqualified persons.\nUnderstand the safe approach distances for shock\, arc flash\, arc-blast and the purpose of a safe work zone.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-non-electrical-personnel-virtual-5/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251023T080000
DTEND;TZID=America/New_York:20251023T160000
DTSTAMP:20260519T091212
CREATED:20251001T151033Z
LAST-MODIFIED:20251001T151624Z
UID:3453-1761206400-1761235200@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: Attendees should have completed OSHA/CSA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA/CSA-mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metalclad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required PPE.\nEnergized and de-energized work policy and LOTO requirements.\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA/CSA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-7/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251021T080000
DTEND;TZID=America/New_York:20251022T160000
DTSTAMP:20260519T091212
CREATED:20251001T145935Z
LAST-MODIFIED:20251001T151616Z
UID:3444-1761033600-1761148800@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-7/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251007T080000
DTEND;TZID=America/New_York:20251008T160000
DTSTAMP:20260519T091212
CREATED:20251001T150137Z
LAST-MODIFIED:20251001T151540Z
UID:3447-1759824000-1759939200@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-8/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250926T080000
DTEND;TZID=America/New_York:20250926T160000
DTSTAMP:20260519T091212
CREATED:20250714T161703Z
LAST-MODIFIED:20250714T161703Z
UID:2717-1758873600-1758902400@shermco.ca
SUMMARY:Electrical Safety for Non-Electrical Personnel (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nVirtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common\, everyday tasks. Jewelry contacting energized components\, overstressed power strips\, coffee pots\, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nReview of electrical hazards\, their causes and the potential for injuries and fatalities.\nUnderstand how to avoid these hazards.\nCommon situations that can increase risk to workers.\n OSHA/CSA electrical safety-related work practices regulation as it applies to non-electrical personnel.\nUnderstand electrical LOTO and the Safe Work Zone.\nUnderstand applicable OSHA/CSA regulations for non-electrical workers.\nUnderstand and apply NFPA 70E requirements for unqualified persons.\nUnderstand the safe approach distances for shock\, arc flash\, arc-blast and the purpose of a safe work zone.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-non-electrical-personnel-virtual-4/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250925T080000
DTEND;TZID=America/New_York:20250925T160000
DTSTAMP:20260519T091212
CREATED:20250714T160223Z
LAST-MODIFIED:20250714T160223Z
UID:2709-1758787200-1758816000@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: Attendees should have completed OSHA/CSA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA/CSA-mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metalclad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required PPE.\nEnergized and de-energized work policy and LOTO requirements.\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA/CSA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-6/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250923T080000
DTEND;TZID=America/New_York:20250924T160000
DTSTAMP:20260519T091212
CREATED:20250714T155833Z
LAST-MODIFIED:20250714T155833Z
UID:2700-1758614400-1758729600@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-6/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250912T080000
DTEND;TZID=America/New_York:20250912T160000
DTSTAMP:20260519T091212
CREATED:20250714T161602Z
LAST-MODIFIED:20250714T161602Z
UID:2715-1757664000-1757692800@shermco.ca
SUMMARY:Electrical Safety for Managers & Supervisors (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nAs is often the case\, supervisors\, managers\, and engineers who are responsible for plant maintenance are not actually the individuals performing hands-on maintenance operations. However\, it is critical that they understand workplace safety policies and regulations so they can plan for the direction and training requirements of maintenance staff and assure that proper PPE\, LOTO\, and other safety procedures are well understood and followed. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nHow electrical hazards in the can affect your personnel\, your company and those responsible for electrical workers.\nRecognize electrical safety hazards and plan a course of action to address each one.\nOSHA/CSA regulations and NFPA 70E requirements for taking specific measures to prevent electrical hazards from causing injury or death.\nElectrical hazard awareness and recognition.\nManaging liability created by electrical hazards.\nDesigning and implementing an Electrical Safety Program (ESP) including policies\, safe work procedures and permits\, hazard analysis\, risk assessments and reduction\, training\, PPE and other written program documents.\nPerforming an electrical hazard/risk analysis.\nUsing the NFPA 70E to interpret hazard/risk category classification (HRC) of a given task and assure adequate PPE.\nHow to incorporate changes implemented by the NFPA 70E update.\nIdentify the steps needed to protect employees who work on or near energized parts.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-managers-supervisors-virtual-3/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250911T080000
DTEND;TZID=America/New_York:20250911T160000
DTSTAMP:20260519T091212
CREATED:20250714T160136Z
LAST-MODIFIED:20250714T160136Z
UID:2706-1757577600-1757606400@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: Attendees should have completed OSHA/CSA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA/CSA-mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metalclad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required PPE.\nEnergized and de-energized work policy and LOTO requirements.\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA/CSA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-5/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250909T080000
DTEND;TZID=America/New_York:20250910T160000
DTSTAMP:20260519T091212
CREATED:20250714T155756Z
LAST-MODIFIED:20250714T155756Z
UID:2698-1757404800-1757520000@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-5/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250822T080000
DTEND;TZID=UTC:20250822T160000
DTSTAMP:20260519T091212
CREATED:20250627T224546Z
LAST-MODIFIED:20250714T161709Z
UID:2548-1755849600-1755878400@shermco.ca
SUMMARY:Electrical Safety for Non-Electrical Personnel (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nVirtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common\, everyday tasks. Jewelry contacting energized components\, overstressed power strips\, coffee pots\, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nReview of electrical hazards\, their causes and the potential for injuries and fatalities.\nUnderstand how to avoid these hazards.\nCommon situations that can increase risk to workers.\n OSHA/CSA electrical safety-related work practices regulation as it applies to non-electrical personnel.\nUnderstand electrical LOTO and the Safe Work Zone.\nUnderstand applicable OSHA/CSA regulations for non-electrical workers.\nUnderstand and apply NFPA 70E requirements for unqualified persons.\nUnderstand the safe approach distances for shock\, arc flash\, arc-blast and the purpose of a safe work zone.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-non-electrical-personnel-virtual-3/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250821T080000
DTEND;TZID=UTC:20250821T160000
DTSTAMP:20260519T091212
CREATED:20250627T225559Z
LAST-MODIFIED:20250630T135716Z
UID:2577-1755763200-1755792000@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: Attendees should have completed OSHA/CSA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA/CSA-mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metalclad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required PPE.\nEnergized and de-energized work policy and LOTO requirements.\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA/CSA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-4/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250819T080000
DTEND;TZID=UTC:20250820T160000
DTSTAMP:20260519T091212
CREATED:20250627T225951Z
LAST-MODIFIED:20250630T135812Z
UID:2585-1755590400-1755705600@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-4/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250807T080000
DTEND;TZID=UTC:20250807T160000
DTSTAMP:20260519T091212
CREATED:20250627T225506Z
LAST-MODIFIED:20250630T140108Z
UID:2575-1754553600-1754582400@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: Attendees should have completed OSHA/CSA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA/CSA-mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metalclad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required PPE.\nEnergized and de-energized work policy and LOTO requirements.\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA/CSA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-3/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250805T080000
DTEND;TZID=UTC:20250806T160000
DTSTAMP:20260519T091212
CREATED:20250627T225910Z
LAST-MODIFIED:20250630T140204Z
UID:2583-1754380800-1754496000@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-3/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250725T080000
DTEND;TZID=UTC:20250725T160000
DTSTAMP:20260519T091212
CREATED:20250627T224500Z
LAST-MODIFIED:20250630T140432Z
UID:2546-1753430400-1753459200@shermco.ca
SUMMARY:Electrical Safety for Non-Electrical Personnel (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nVirtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common\, everyday tasks. Jewelry contacting energized components\, overstressed power strips\, coffee pots\, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nReview of electrical hazards\, their causes and the potential for injuries and fatalities.\nUnderstand how to avoid these hazards.\nCommon situations that can increase risk to workers.\n OSHA/CSA’s electrical safety-related work practices regulation as it applies to non-electrical personnel.\nUnderstand electrical LOTO and the Safe Work Zone.\nUnderstand applicable OSHA/CSA regulations for non-electrical workers.\nUnderstand and apply NFPA 70E requirements for unqualified persons.\nUnderstand the safe approach distances for shock\, arc flash\, arc-blast and the purpose of a safe work zone.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-non-electrical-personnel-virtual-2/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250724T080000
DTEND;TZID=UTC:20250724T160000
DTSTAMP:20260519T091212
CREATED:20250627T225426Z
LAST-MODIFIED:20250630T140510Z
UID:2573-1753344000-1753372800@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: Attendees should have completed OSHA/CSA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA/CSA-mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metalclad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required PPE.\nEnergized and de-energized work policy and LOTO requirements.\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA/CSA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-2/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250722T080000
DTEND;TZID=UTC:20250723T160000
DTSTAMP:20260519T091212
CREATED:20250627T225830Z
LAST-MODIFIED:20250630T140600Z
UID:2581-1753171200-1753286400@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-2/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250711T080000
DTEND;TZID=UTC:20250711T160000
DTSTAMP:20260519T091212
CREATED:20250627T231033Z
LAST-MODIFIED:20250630T140819Z
UID:2594-1752220800-1752249600@shermco.ca
SUMMARY:Electrical Safety for Managers & Supervisors (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nAs is often the case\, supervisors\, managers\, and engineers who are responsible for plant maintenance are not actually the individuals performing hands-on maintenance operations. However\, it is critical that they understand workplace safety policies and regulations so they can plan for the direction and training requirements of maintenance staff and assure that proper PPE\, LOTO\, and other safety procedures are well understood and followed. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nHow electrical hazards in the can affect your personnel\, your company and those responsible for electrical workers.\nRecognize electrical safety hazards and plan a course of action to address each one.\nOSHA/CSA regulations and NFPA 70E requirements for taking specific measures to prevent electrical hazards from causing injury or death.\nElectrical hazard awareness and recognition.\nManaging liability created by electrical hazards.\nDesigning and implementing an Electrical Safety Program (ESP) including policies\, safe work procedures and permits\, hazard analysis\, risk assessments and reduction\, training\, PPE and other written program documents.\nPerforming an electrical hazard/risk analysis.\nUsing the NFPA 70E to interpret hazard/risk category classification (HRC) of a given task and assure adequate PPE.\nHow to incorporate changes implemented by the NFPA 70E update.\nIdentify the steps needed to protect employees who work on or near energized parts.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-managers-supervisors-virtual/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250710T080000
DTEND;TZID=UTC:20250710T160000
DTSTAMP:20260519T091212
CREATED:20250627T225359Z
LAST-MODIFIED:20250630T140856Z
UID:2571-1752134400-1752163200@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: Attendees should have completed OSHA/CSA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA/CSA-mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metalclad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required PPE.\nEnergized and de-energized work policy and LOTO requirements.\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA/CSA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250708T080000
DTEND;TZID=UTC:20250709T160000
DTSTAMP:20260519T091212
CREATED:20250627T225756Z
LAST-MODIFIED:20250630T141015Z
UID:2579-1751961600-1752076800@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250620T080000
DTEND;TZID=UTC:20250620T160000
DTSTAMP:20260519T091212
CREATED:20250627T224335Z
LAST-MODIFIED:20250630T141236Z
UID:2508-1750406400-1750435200@shermco.ca
SUMMARY:Electrical Safety for Non-Electrical Personnel (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nVirtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common\, everyday tasks. Jewelry contacting energized components\, overstressed power strips\, coffee pots\, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nReview of electrical hazards\, their causes and the potential for injuries and fatalities.\nUnderstand how to avoid these hazards.\nCommon situations that can increase risk to workers.\n OSHA/CSA’s electrical safety-related work practices regulation as it applies to non-electrical personnel.\nUnderstand electrical LOTO and the Safe Work Zone.\nUnderstand applicable OSHA/CSA regulations for non-electrical workers.\nUnderstand and apply NFPA 70E requirements for unqualified persons.\nUnderstand the safe approach distances for shock\, arc flash\, arc-blast and the purpose of a safe work zone.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-non-electrical-personnel-virtual/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250619T080000
DTEND;TZID=America/Chicago:20250619T160000
DTSTAMP:20260519T091212
CREATED:20250415T030343Z
LAST-MODIFIED:20250418T210834Z
UID:2363-1750320000-1750348800@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metalclad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required PPE.\nEnergized and de-energized work policy and LOTO requirements.\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-7/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250617T080000
DTEND;TZID=America/Chicago:20250618T160000
DTSTAMP:20260519T091212
CREATED:20250415T030343Z
LAST-MODIFIED:20250418T210913Z
UID:2362-1750147200-1750262400@shermco.ca
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHAmandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.ca/training-catalog/electrical-safety-for-qualified-electrical-workers-11/
CATEGORIES:United States Virtual
END:VEVENT
END:VCALENDAR